Solar Simulator AAA cum Bias light (set of xenon lamp with AM1.5G filter), max illumination area 2 X
2cm (0.1 to 1 sun intensity)

• Uniformity +/-2%
•  Temporal stability +/-2%Spectral mismatch +/-25%

Photovoltaic Spectrometer IPCE/EQE/IQE, 4 X 4mm or 6.5 X 6.5mm illumination area, application include

• Photocurrent,
• Sample retlectance,
• Sample transmittance.
• External quantum efficiency,
• Internal quantum efficiency,
• Short-circuit current density.

1. Controller
2. Spectral range: 200 nm – 1650 nm,

• Adjustable white light beam intensity:0.01 – 0.1 W/cm2,
• Illumination homogeneity: 10 %,
•  XY table range: 20 x 20 cm,
• Sample bias range: ± 2 V.

3.Monochromator 200-1650nm

• Spectral range: 200 nm – 2.4 µm (grating dependent!)
• Focal length: 200 mm
• Aperture ratio: f/4
• Number and configuration of slits: customizable
• Slit adjustment: motorized
• Maximum slit width: 5 mm
• Maximum number of gratings: 4
• Grating selection mechanism: motorized
• Dispersion: 4 nm/mm for 1200 gr/mm grating
• Wavelength setup: digital
• Internal shutter setup: digital
• External connectivity: serial port RS485
• Power supply: 230 V / 50 Hz or 120 V / 60 Hz
• Size: 260x273x120 mm (l. x w. x h.)
• Weight: about 8 kg
• Set of xenon lamp150W w Xenon lamp controller & cooling
• Nominal electric power: 150 W
• Output beam: horizontal or vertical
• Reflector type: elliptical (for convergent beam)
  or parabolic (for collimated beam)
• Reflecting system efficiency: up to 70 %
• Maximal electric current: 8.5 A
• Normal working current: 7.5 A
• Current resolution: 0.1 A
• Stabilization of current: better than 0.1 %
• Stabilization of light intensity: available
• Set of halogen lamp, 150W w controller
• power output: 150 W
• digital control of light’s power
• reflector type- elliptic or parabolic
• air cooling
• power supply: 230 V
• I-V measurement system
• Current ranges: 10 nA, 100 nA, 1 µA, 10 µA, 100 µA, 1 mA, 10 mA
• Current resolution from 1 pA to 100 nA (range dependent)
• Potential range from -5V to 5V
• Probe frequency: 1 kHz
• current-voltage (IV) characteristics
• cyclic voltammetry (CV)
• chonomaperometry (CA)
• open circuit potential (OCP)
• Integrating sphere
• Integrating sphere diameter: 76.2 mm (3 in)
• Input port diameter: 13.6 mm
• Sample port diameter: 13.6 mm
• Detection port diameter: 6 mm
• Coating type: barium sulfate
• Reflectance: > 97% in 350-850 nm,
  > 92% in 250-1300 nm
• Sphere multiplier: 30.5 @ 550 nm
• IPCE photodiodes detectors Si & InGaAs reference detectors, traceable to standards
•  Cell contacts manual press pin type, coarse and fine movement
• Vacuum Pump to hold sample
• Sample chamber with Motorised stage, Sample chamber specification (l:75cm x w:55cm x
  h:41cm; Faraday's cage with inner backlight)
• FotoGUI Software, includes
• Determination of device spectral response (SR, [A/W])
• Determination of the device's external quantum efficiency (EQE, [%]).
• Determination of total reflectance (R [%]) and transmittance (T [%]) to convert EQE to
  intrinsic quantum efficiency (IQE, [%]) for cells with polished and textured surfaces.
• Source code available (user may adapt the software)
  i7 computer with 24 inch screen